Re: Post your Quiver here

Quiver

Post your Quiver here

Flood~Kontroller 01-31-2006, 8:58 AM

Okay, this is actually some decks I sold.

I am waiting on a couple more items before I post my real quiver.

info@floodkontrol.com

Re: Post your Quiver here

pflocal 01-31-2006, 4:00 PM
here's mine as previously posted in a different thread.

recently added another slalom board, a Skaterbuilt ConeKiller TS.

Really like the graphics on your Santa Monica.

Pflugerville Dreaming...

Trix are for kids

Re: Post your Quiver here

cskate 02-24-2006, 8:55 AM
<img src="http://www.oldschoolskateboarding.com/features/Quivers/cskate/DSC02538.jpg" border="0" />

Hopefully the img link works, I never seem to have luck with it on here.

"I've fallen and I can't get up"
Golden Years Skate Club
http://www.oldschoolskateboarding.com

Re: Post your Quiver here

Fish Taco 03-09-2006, 5:33 PM
Here's mine:

l to r:
Basic S9 Pintail (swapped out the crappy greaseball bearings though)
(for the occasional downhill session)

Vision MG/Gonz reissue, Tracker Six Tracks, Powell G-Bones
(I don't like riding popsicle sticks, and I haven't been skating parks for very long, so I bought this set-up so I could learn in comfort at Los Osos. I still suck, but this one is a blast to ride.)

Vintage Schmitt Stix Monty Nolder "Tiki", vintage Indys (with new Indy bushings), original 1/2" risers, Powell Rat Bones reissues
(My roommate's girlfriend, who has never skated, had this one and a vintage Santa Cruz Jeff Kendall sitting in her garage for some reason. I bought both for $20. Both boards had beat-up Indys, so I mixed and matched the hangars and baseplates in the best condition and put it all on the Monty Nolder. I kept the original risers, but I think I'm going to take them off because the board rides way too high. I swapped out the vintage vision wheels (see below) in favor of the Rat Bones, because I'd rather make this one a ditch board than a park board)

Custom deck (cut by Johnny Miller of the Trading Post in SLO, CA), Tracker B-2s, 1/2" angled risers, Abec-11 Retro Bertz (60mm/81a)
(My main "getting around" board these days. The B-2s handle really well, and the Bertz have a good combination of grippiness and slideability for riding banks etc.)

S9 mini, Destructo trucks (with Bones soft bushings), 62mm Nine Balls
(I mainly ride this when smaller is better, like on this little hip on campus, but the concave makes it an aggressive little board for moderate downhilling and weaving through human traffic)

I like the sloppy grip job on the Monty Nolder...someone used scraps from 3 or 4 sheets of grip tape. I cut the grip tape on the custom deck myself.

These are the wheels that came on the Schmitt Stix. Two are 97a and the other two are 94a.

Re: Post your Quiver here

cskate 03-09-2006, 5:53 PM
"Vintage Schmitt Stix Monty Nolder "Tiki", vintage Indys (with new Indy bushings), original 1/2" risers, Powell Rat Bones reissues
(My roommate's girlfriend, who has never skated, had this one and a vintage Santa Cruz Jeff Kendall sitting in her garage for some reason. I bought both for $20."

Graaahhh! you dog what a deal. Lets hear it for people who never skated with vintage board setup's. May we continue to exploit them for all time.

I got to skate Los Osos when i was down there in December. Fun Park.

"I've fallen and I can't get up"
Golden Years Skate Club
http://www.oldschoolskateboarding.com

Re: Post your Quiver here

Fish Taco 03-09-2006, 6:01 PM
If it's any consolation, the Jeff Kendall was completely trashed - not even worth keeping around as a decoration.

Re: Post your Quiver here

zato_ichi 03-17-2006, 12:43 PM

Dude that brings back memories, the Monty was my first concave board before that I rode a Kryto KBeam, I loved those Schmitt boards, growing up in FLA Paul Schmitt was a local hero around the Tampa Bay area. I still have an old set of Schmitt Stix rails.

here is a shot of about half of mine,

Proud member in good standing of both Team Geritol and Grippy's Goon Squad

Re: Post your Quiver here

skatingkeepsmesane 04-18-2006, 8:17 PM

My "mini-quiver" - not comparable to any of you guys' yet, but it's coming along.

1. Rainskates "Big Tex" custom (stretched Alva Gibson shape) - G&S Chromolly trucks - Ditch Rats (60mm 85A)

2. Poolside "Ditch Desperado" deck - Indy 169's - Rainskates Tsunami's (65mm 85A) - My main ditch set-up.

3. Madrid Pool Hybrid blank deck - I'm thinking of setting it up as a "liquor store cruiser". I have some Madrid 78A wheels for it, but I'm switching the trucks I had on it to the Conspiracy deck.

4. Conspiracy "Ditch Creep" deck - the trucks at the bottom (Tracker 149's) are going on this one as soon as I get some bigger, softer wheels. I had the Powell wheels (58mm 90A), but found them a little too hard and small.

http://i33.photobucket.com/albums/d89/skatingkeepsmesane/P4180004.jpg

Re: Post your Quiver here

Chris W 08-20-2006, 8:09 AM

This photo was taken about 18 months ago now.

Got a shitload more now! Embarrassed [:$] Updated version coming.........soonish!

http://i4.photobucket.com/albums/y130/Surfpunk2000/quiver.jpg

Re: Post your Quiver here

Flood~Kontroller 08-20-2006, 9:47 AM

Just copy the "IMG" file from photobucket and paste it in here!!!
Like this...

& BTW... I am diggin' those old Hobie's Yes [Y] Yes [Y]

Re: Post your Quiver here

skatingkeepsmesane 10-18-2006, 7:53 PM

Here's my updated quiver shot.

1. S9 Bomber, Crail trucks, S9 Godess 78A 76mm wheels (My brand new longboard/hill bomber)

2. Conspiracy Ditch Creep, Randal 150's, Krypto 80A 70mm wheels (My mid-size ditch board)

3. Poolside Ditch Desperado, Indy 169's, Rainskates Tsunamis (Still my main ditch ride, except for the faster ditches where #'s 1 or 2 might be a little more appropriate)

4. Madrid Pool Hybrid, Tracker 149's, S9 Bamboo 75A 70mm (My current commuter board)

5. Sacrifice Stencil deck, Tracker 149's, NOS Santa Cruz Bullet 63mm 95A (My main park board, although with the little free time I have, the wheels have yet to be broken in)

6. Flood Kontrol Kujo, G&S trucks, SMA Viagras 62mm, 88A (My main "session" ditch board)

Re: Post your Quiver here

nukedog 05-27-2008, 10:47 AM

current quiver

1979 quiver