|
|
For Sale / Wanted
Started by bpizzle at 04-24-2006 5:34 PM. Topic has 0 replies.
  
|
|
Sort Posts:
|
|
|
|
 04-24-2006, 5:34 PM
|
bpizzle
Joined on 04-25-2006
Posts 1
|
FS: FeralArts deck, Tracker midtrack, face lexan + wheels
|
|
|
|
|
Paypal payments are easiest for me. I like to ship with the USPS, usually Priority Mail unless prices are outrageous. I can give you shipping quotes if you ask, and we can decide on the cheapest/easiest solution. Email me (brian AT cancerkills DOT net) with any questions, comments or offers.
Custom Feral Arts pool/street/ditch board - 37 inches long, 8.5 inches wide, 17.5" wheelbase, drilled NEW SCHOOL. I got this custom made for me by Brian at Feral Arts last fall. Basically an oversized shortboard with a poolboard shape. It's got real nice concave through the middle with a 7" rounded nose and a 7" flat tail. I put black rails on the bottom and a tail skid on the back. Also drilled the nose for a nose skid but didn't end up putting one on. Has been ridden but not abused; I don't really do boardslides so the bottom is in fairly good shape. Real nice deck for anyone with ditches to skate. $40 plus shipping
http://brian.cancerkills.net/skateboards/forsale/feralarts1.jpg
http://brian.cancerkills.net/skateboards/forsale/feralarts2.jpg
http://brian.cancerkills.net/skateboards/forsale/feralarts3.jpg
http://brian.cancerkills.net/skateboards/forsale/feralarts4.jpg
85mm Tracker Midtrack - I bought this with TS in mind, but I got some Indy 109s to use instead. I upgraded to a longer (I think 2.75", maybe 2.5") grade-8 kingpin with a tall locknut. Definitely enough kingpin space for the big, soft, cushy bushings you need for TS. Faced the hangers for more precision. I'll include a white Khiro barrel on bottom with a tall blue Khiro insert on top. $15 plus shipping
http://brian.cancerkills.net/skateboards/forsale/midtrack1.jpg
http://brian.cancerkills.net/skateboards/forsale/midtrack2.jpg
70mm clear Kryptos, 78a - I got these on my first board two years ago. I rode them hard for a year and a half but never slid them. They're pretty coned and grip well, no chunks or flatspots. Old wheels still in great condition... great for a starter board for a new rider. Sideset with 8mm spacing. $6 plus shipping
65mm Powells, ~85a - I rode these on a shortboard because I hate hard kickflipper wheels. I'm almost positive they were 65mm Powells in 85a, but can't guarantee that. They are 65mm and feel right around 85a, pretty smooth wheels. Sideset with (I think) 8mm spacing. $6 plus shipping
~68mm misc. red wheels - Not sure who makes/made these, they look like S9 or Gravity wheels. They have a black hub and are worn down to around 68mm, probably started at 70mm. I'd guess the duro is around 85-88a, they're pretty stiff but are grippy, too. Sideset with (I think) 8mm spacing. $5 plus shipping
Take all 3 sets of wheels for $12 plus shipping
http://brian.cancerkills.net/skateboards/forsale/wheels1.jpg
http://brian.cancerkills.net/skateboards/forsale/wheels2.jpg
http://brian.cancerkills.net/skateboards/forsale/wheels3.jpg
I also have a huge sheet of 1/16" polycarbonate/lexan, 48x24", that I got from McMaster-Carr, a highly reputable online supply shop. I used a small piece to make a face shield for my full face and still have a bunch left over. I have a friend who might use some, and I might make a few more tinted shields, so I'm not sure how much is available... maybe enough for 2 helmets. If you can give me the dimensions of a rectangle that will fit the template for your shield, I'll sell you a decent sized piece (within reason) for $7 plus shipping. Hop on this if you want/need some; like I said, it may not last.
|
|
|
|
|
Report
|
|
|
|
|
|